Designs Library (Class A)
 
Designs Library (Class A)
user: Guest
 
 
1015 Wide Stripe
Wide Stripe (1015) on a swing door.
Wide Stripe:   Frosted wide stripe on a clear background  The design starts with a trim stripe, one large stripe, and finishes with a trim strip. The design is centered on the door panel, and follows at the same height for all other panels in the shower unit.
 
Wide Stripe (1015) on a swing door and inline panel.
 
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The total width of the design is 38.5 inches and is centered on the door. The design is positioned on the other panels so that they align with the door design.
 
   

Wide Stripes:

1015 FC  Frosted stripes on clear glass.

1017 Standard Stripes
Standard Stripes (1017) shown as placed on a swing door.
Standard Stripes:   Frosted graduated stripes on a clear background  The stripes start small and get wider in the middle and then get small again. This is the standard privacy stripe pattern.  This simple design adds a touch of class to the any bathroom. Carved glass design show the best when bronze or gray glass is used.
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The total width of the design is 38.5 inches and is centered on the door. The design is positioned on the other panels so that they align with the door design.
 
 
Standard Stripes design (1017) swing door and  inline layout.
 
 

Standard Stripes:

1017 FC  Frosted stripes on clear glass.

1046 Venetian Stripes
Venetian Stripes (1046) on a swing door.
Venetian Stripes:   Frosted stripes all of the same size form a privacy band. This simple design provides privacy yet keeps the top and bottom of the shower visually open.
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The total width of the design is 32.5 inches and is centered on the door. The design is positioned on the other panels to align with the door design.
Venetian Stripes:

1046 FC   Frosted design on clear glass.

3003 Thin Border Stripe
Border Stripe (3003) on a swing door.
Border Stripe:   Frosted stripe bordering to glass. This simple design provides a light touch of customization.

Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The 3002 stripe width is 1/2 inch, and the 3003 stripe is 1 inch wide.

 

Border Stripes:

3002 FC   1/2" Frosted stripe on clear glass.

3002 CF   1/2" Clear design on Frosted glass.

3003 FC   1" Frosted stripe on clear glass.

3003 CF  1" Clear stripe on Frosted glass.

3004 Wide Border Stripe
Border Stripe (3004) on a swing door.
Wide Border Stripe:   Frosted stripes all of the same size form a privacy band. This simple design provides privacy yet keeps the top and bottom of the shower visually open.
Technical: The design is sandblast on to the outside surface of the shower door glass. It will not peel or chip. The frosted area are very obscure see the glass gallery for a picture. The 3004 stripe width is 1-1/2 inches, and 3005 is a 2 inch stripe.
Wide Border Stripe:

3004 FC   Frosted stripe on clear glass.

3004 CF   Clear stripe on frosted glass.

3005 FC   Frosted stripe on clear glass.

3005 CF   Clear stripe on frosted glass.

 
 
 
© 2004– 2011 eShowerDoor.com All rights reserved.