|
|
| Rose
Arbor (3085FC)
on a swing door. |
|
|
| Rose
Arbor : Frosted
design on a clear background. This pattern |
| |
|
| 4-Line
Deco (3006FC)
on a swing door and inline panel. |
|
|
|
| Technical: The
design is sandblast on to the outside surface of the
shower door glass. It will not peel or chip. The frosted
areas are sealed with Crystal
Sheild II. The design
size is adjusted at the designers descression. The
design is placed with the flower on the hinge side
of the door.. |
|
|
|
| |
|
Rose
Arbor :
3085 FC Frosted
flower on clear glass.
3085 CF Clear
Flower on Frosted glass glass. |
|
|
|
|
|
| Cathedral (1019FC)
shown as placed on a swing door. |
|
|
| Cathedral: These
six graceful lines merge together at the
center of the panelcreating the visual
effect of a conthedral arch. If the lines
are frosted the dimond areas where the
lines cross is left clear. Conversely
if the lines are clear the crossover dimands
are frosted. This design can be done as
frosted lines on clear
glass (FC), or for more privacy clear
lines on frosted glass (CF). |
|
Cathedral (1019FC)
swing door and inline layout. |
|
| Technical: The
design is sandblast on to the outside
surface of the shower door glass.
It will not peel or chip. The frosted
areas are sealed with Crystal
Sheild II. The frosted area are
very obscure see the glass gallery
for a picture of frosted glass. The
design is typically positioned so
that the center line is positioned
to be at 60% of the panel height.
The scale and positioning is of the
design is a the designer descression. |
|
|
| |
| Technical: The
design is sandblast on to the outside
surface of the shower door glass.
It will not peel or chip. The frosted
areas are sealed with Crystal
Sheild II. The frosted area are
very obscure see the glass gallery
for a picture of frosted glass. The
design is typically positioned so
that the center line is positioned
to be at 60% of the panel height.
The scale and positioning is of the
design is a the designer descression. |
|
|
Cathedral:
1019
FC Frosted
stripes on clear glass.
1019 CF Clear
stripes on frosted glass. |
|
|
|
|
|
|
| 4-Diamonds (3093FC)
on a swing door. |
|
|
|
|
|
4-Diamonds: This
Diamond border design is simple and
clean in appearance. The design is available
as froasted lines on clear glass or
clear lines on frosted glass. A four
diamond design is used on wide panels,
and a two dimaond design is used on
narrow panels. |
|
|
|
Technical: The
design is sandblast on to the outside surface of the
shower door glass. It will not peel or chip. The frosted
areas are sealed with Crystal Sheild II.
The design size is adjusted at the designers descression.
The design is placed on the panels so that they matchas
a set. |
|
|
|
4-Diamonds
(3093FC) swing door and inline
layout. |
|
|
| 4-Diamonds:
3093 FC Frosted
design on clear glass.
3093 CF Clear
design on Frosted glass. |
|
|
|
|
|
|
|
| Weave (Large) (6342FC)
on a swing door. |
|
|
|
|
|
Weave (Large): This
Weave design is simple and
clean in appearance. The design is available
as froasted lines on clear glass. The size of the sample door to the left is 28" x 72". The design size needs a panel at least 10" wide for the design to be effective. Smaller panels should be frosted glass, or consider using the smaller weave design (6341FC).. |
|
|
|
Technical: The
design is sandblast on to the outside surface of the
shower door glass. It will not peel or chip. The frosted
areas are sealed.
The design size, positioning, and border size is adjusted at the designers descression. A weave segment on the large weave design is approximatly 3" long. The design is placed on the panels so that they match as
a set. |
|
|
Weave
(6342FC) swing door and inline
layout. |
|
|
| Weave (large):
6342 FC Frosted
design on clear glass.
|
|
|
|
|
|
|
| Weave (6341FC)
on a 28"x72" swing door. |
|
|
|
|
|
Weave (Std.): This
Weave design is simple and
clean in appearance. The design is available
as froasted design on clear glass. The size of the sample door to the left is 28" x 72". The design size needs a inline side panel needs to be at least 8" wide for the design to be effective. Smaller panels should be frosted glass. |
|
|
|
Technical: The
design is sandblast on to the outside surface of the
shower door glass. It will not peel or chip. The frosted
areas are sealed.
The design size, positioning, and border size is adjusted at the designers descression. A weave segment on the standard design is approximatly 3" long.
The design is placed on the panels so that they match as
a set. |
|
|
Weave
(6341FC) swing door and inline
layout. |
|
|
| Weave (Std.):
6341 FC Frosted
design on clear glass.
|
|
|
|
|
|
|
|
|
|
