- Gallery
- Shower Doors Style/layouts
- Screens
- Side Hinges (Std Duty 3/8-1/2)
- Side Hinges (Hvy Duty 3/8-1/2)
- Side Hinges (Lit Duty 1/4-5/16)
- Pivot Hinges
- BiFold Hinges
- Sliding Door Hardware
- Door Pulls
- Grab Bars
- Fixed Panel Hardware
- Transom Clamps
- Header Systems
- Door Seals
- Cleaning the Shower
- Maintenance
- Installation Help
| user: |  |
Polycarbonate Door Jamb for 135º for 3/8" Glass
3/8 in. 135º Polycarbonate Door Jamb
- Snaps Onto Fixed Panel or Door
- For Glass to Glass Neo Angle Applications
- 84" Stock Length
- Replaceable vinyl Insert
This Clear Polycarbonate Door Jamb is snapped onto the door on the hinge side to achieve a seal to the fixed panel in 135 Degree neo-angle installations. Contains vinyl insert.
3/8 in. 135º Polycarbonate Door Jamb
The P135DJ convert s a a door from an in/out-swing door to an out-swing only. Most of the self centering hinges have a built in 5° offset pivot pin. The offset pin makes the door center 5° to the inside of the shower. This feature make s the door apply slight pressure on to the P090SJ seal. It not only assures that the door stays shut, it also make the seal water tight. It also gives the door a real solid closing action. Adjustable hinges can be used in a similar way. Remove the seal and adjust the door so it stops 5° to the inside of the shower. Replace the seal and you all set.
