user:

Polycarbonate 180º "h" Jamb for 1/4", 3/8", 1/2" Glass

180º Polycarbonate H jamb
  • Three Sizes - For 1/4", 3/8" or 1/2" Glass
  • Snaps Onto Fixed Panel or Door
  • For Glass to Glass Applications
  • 98" Stock Length - Cut to Size
  • Hard Clear Polycarbonate
  • This Clear Polycarbonate "h" Jamb is for use on 180º degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side.

180º Polycarbonate H jamb

This is a hard clear polycarbonate seal. This seal works fine with the standard self-centering hinges. For a more positive close most of the hinges can be modified so that they center themselves at 5º to the inside of the shower. This mkes it so the door always providing a slight pressure on the jamb. Cut this jamb to size using a fine tooth saw like a hacksaw, or a chop saw.