user:
 
 
 
Satin Brass (Matte)

 
Brushed Stainless

 
Polished Stainless

 
Brushed Pewter

 
Red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
BGCU1 - Beveled Heavy Duty U Clamp

For 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Notch Required
Two Hidden #10 Anchor Screws
Three Year Warranty
 
This Frameless Shower Door Beveled Wall Mount Clamp mounts directly to the wall, ceiling or floor to secure vertical fixed glass panels. This is one of the best glass clamps because it is mounted with two hidden #10 screws. Clearance between the glass and wall is from 1/16 to 3/16 inch. Clear silicone can be used to seal the gap and provide a clean, water-tight appearance.
BM12 - 12" Sgl-Side Towel Bar + Washer

For 1/4" to 1/2" Glass

Decorative Washers
Heavy Brass Construction
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM12X12 - 12" Bak-to-BakTowel Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
For 1/4" to 1/2" Glass
Three Year Warranty
 
Our Frameless Shower Door Tubular Back-to-Back Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM18 - 18" Sgl-Side Towel Bar+Washer

For 1/4" to 1/2" Glass

Decorative Washers
Heavy Brass Construction
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM18X18 - 18" Bk-to-BkTowel Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
For 1/4" to 1/2" Glass
Three Year Warranty
 
Our Frameless Shower Door Tubular Back-to-Back Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM20 - 20" Sgl-Side Towel Bar + Washer

For 1/4" to 1/2" Glass

Decorative Washers
Heavy Brass Construction
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM22 - 22" Sgl-Side Towel Bar + Washer

For 1/4" to 1/2" Glass

Decorative Washers
Heavy Brass Construction
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM24 - 24" Sgl-Side Towel Bar + Washer

For 1/4" to 1/2" Glass

Decorative Washers
Heavy Brass Construction
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM24X24- 24" Bk-to-BkTowel Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
For 1/4" to 1/2" Glass
Three Year Warranty
 
Our Frameless Shower Door Tubular Back-to-Back Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM26 - 26" Sgl-Side Towel Bar + Washer

For 1/4" to 1/2" Glass

Decorative Washers
3/4" Diameter Heavy Brass Tubing
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM27 - 27" Sgl-Side Towel Bar + Washer

For 1/4" to 1/2" Glass

Decorative Washers
3/4" Diameter Heavy Brass Tubing
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM28 - 28" Sgl-Side Towel Bar + Washer

For 1/4" to 1/2" Glass

Decorative Washers
3/4" Diameter Heavy Brass Tubing
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM30 - 30" Sgl-Side Towel Bar + Washer

For 1/4" to 1/2" Glass

Decorative Washers
3/4" Diameter Heavy Brass Tubing
Three Year Warranty
 
Our Frameless Shower Door Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM30X30 - 30" Bk-to-BkT-Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
For 1/4" to 1/2" Glass
Three Year Warranty
 
Our Frameless Shower Door Tubular Back-to-Back Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM30X30 - 30" Bk-to-BkT-Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
For 1/4" to 1/2" Glass
Three Year Warranty
 
Our Frameless Shower Door Tubular Back-to-Back Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BM6X12 - 6" Pull - 12" Towel Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
For 1/4" to 1/2" Glass
Three Year Warranty
 
The Frameless Shower Door BM series Pull Handle / Towel Bar Combination with washers is constructed of heavy brass tubing, Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BM6X18 - 6" Pull - 18" Towel Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
For 1/4" to 1/2" Glass
Three Year Warranty
 
The Frameless Shower Door BM series Pull Handle / Towel Bar Combination with washers is constructed of heavy brass tubing, Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BM6X24 - 6" Pull - 24" Towel Bar + Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
Through the glass assembly
1/2" holes required
Three Year Warranty
 
The Frameless Shower Door BM series Pull Handle / Towel Bar Combination with washers is constructed of heavy brass tubing, Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BM6X6 - 6" Bak-to-Bak Pull + Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
Through the glass assembly
1/2" holes required
Three Year Warranty
 
The Frameless Shower Door BM Series of Back to Back Tubular Pull Handles with Metal Washers are constructed of heavy brass tubing. Decorative metal washers are included, as well as plastic washers to protect against glass to metal contact. The set consists of one pull for each side of the door.
BM8X18 - 8" Pull - 18" Towel Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
The Frameless Shower Door BM series Pull Handle / Towel Bar Combination with washers is constructed of heavy brass tubing, Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BM8X24 - 8" Pull - 24" Towel Bar+Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
The Frameless Shower Door BM series Pull Handle / Towel Bar Combination with washers is constructed of heavy brass tubing, Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BM8X8 - 8" Bak-to-Bak Pull + Washers

3/4" Diameter Heavy Brass Tubing

Decorative Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
The Frameless Shower Door BM Series of Back to Back Tubular Pull Handles with Metal Washers are constructed of heavy brass tubing. Decorative metal washers are included, as well as plastic washers to protect against glass to metal contact. The set consists of one pull for each side of the door.
BMNW12X12 - 12" Bak-to-Bak Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Back-to-Back Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW12X12 - 12" Bak-to-Bak Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Back-to-Back Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW18 - 18" Sgl-Side Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW18X18 - 18" Bak-to-Bak Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Back-to-Back Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW20 - 20" Sgl-Side Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW22 - 22" Sgl-Side Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW24 - 24" Sgl-Side Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW24X24 - 24" Bk-to-Bk Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Back-to-Back Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW26 - 26" Sgl-Side Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW27 - 27" Sgl-Side Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW28 - 28" Sgl-Side Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW30 - 30" Sgl-Side Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW30X30 - 30" Bk-to-Bk Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Back-to-Back Shower Door Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW6X12 - 6" Pull - 12" Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the Glass Mounting
Three Year Warranty
 
The popular BM series Pull Handle / Towel Bar Combination is constructed of heavy brass tubing. This shower door Pull / Towel Bar does not have metal washers. Plastic washers are used to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BMNW6X12 - 6" Pull - 12" Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the Glass Mounting
Three Year Warranty
 
The popular BM series Pull Handle / Towel Bar Combination is constructed of heavy brass tubing. This shower door Pull / Towel Bar does not have metal washers. Plastic washers are used to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BMNW6X18 - 6" Pull - 18" Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the Glass Mounting
Three Year Warranty
 
The popular BM series Pull Handle / Towel Bar Combination is constructed of heavy brass tubing. This shower door Pull / Towel Bar does not have metal washers. Plastic washers are used to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BMNW6X24 - 6" Pull - 24" Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the Glass Mounting
Three Year Warranty
 
The popular BM series Pull Handle / Towel Bar Combination is constructed of heavy brass tubing. This shower door Pull / Towel Bar does not have metal washers. Plastic washers are used to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires three 1/2 inch diameter holes.
BMNW6X6 - 6" Bak-to-Bak Pull

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the Glass Mounting
Three Year Warranty
 
The NEW BM Series Back-to-Back Tubular Shower Door Handles without Metal Washers are constructed of 1.5 mil thick heavy brass tubing. These handles do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one pull for each side of the door (back-to-back). The BM Series Pull Handles offered in ten stock finishes
BMNW8X18 - 8" Pull - 18" Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the Glass Mounting
Three Year Warranty
 
The NEW BM Series Back-to-Back Tubular Shower Door Handles without Metal Washers are constructed of 1.5 mil thick heavy brass tubing. These handles do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one pull for each side of the door (back-to-back). The BM Series Pull Handles offered in ten stock finishes
BMNW8X24 - 8" Pull - 24" Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
Designed for 1/4" to 1/2" Glass
Through the Glass Mounting
Three Year Warranty
 
The NEW BM Series Back-to-Back Tubular Shower Door Handles without Metal Washers are constructed of 1.5 mil thick heavy brass tubing. These handles do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one pull for each side of the door (back-to-back). The BM Series Pull Handles offered in ten stock finishes
BMNW8X8 - 8" Bak-to-Bak Pull

3/4" Diameter Heavy Brass Tubing

No Washers
Designed for 1/4" to 1/2" Glass
Through the Glass Mounting
Three Year Warranty
 
The NEW BM Series Back-to-Back Tubular Shower Door Handles without Metal Washers are constructed of 1.5 mil thick heavy brass tubing. These handles do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one pull for each side of the door (back-to-back). The BM Series Pull Handles offer eight stock finishes

3/4" Diameter Solid Brass Bar

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
These BPD Series Back-to-Back Solid Shower Door Towel Bars without Metal Washers are constructed of solid brass rod. These towel bars do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one towel bar for each side of the door (back-to-back). The BPD Series Towel Bars offer four stock finishes, with custom finishes available upon request by contacting
BPD24 - 24" Bk-to-Bk Towel Bar Solid

3/4" Diameter Solid Brass Bar

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
These BPD Series Back-to-Back Solid Shower Door Towel Bars without Metal Washers are constructed of solid brass rod. These towel bars do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one towel bar for each side of the door (back-to-back). The BPD Series Towel Bars offer four stock finishes, with custom finishes available upon request by contacting
BPD30 - 30" Bk-to-Bk Towel Bar Solid

3/4" Diameter Solid Brass Bar

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
These BPD Series Back-to-Back Solid Shower Door Towel Bars without Metal Washers are constructed of solid brass rod. These towel bars do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one towel bar for each side of the door (back-to-back). The BPD Series Towel Bars offer four stock finishes, with custom finishes available upon request by contacting
BPD6 - 6" Bak-to-Bak Pull Solid

3/4" Diameter Solid Brass Construction

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
We offers a selection of Solid Brass Shower Door Pull Handles in either Back-to Back or Single-Sided styles, with a choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (31.8 millimeter) diameter metal washers. The handle requires 1/2 inch holes in the glass, and stands 2-1/2 inches off the surface of the glass.
BPD6 - 6" Bak-to-Bak Pull Solid

3/4" Diameter Solid Brass Construction

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
We offers a selection of Solid Brass Shower Door Pull Handles in either Back-to Back or Single-Sided styles, with a choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (31.8 millimeter) diameter metal washers. The handle requires 1/2 inch holes in the glass, and stands 2-1/2 inches off the surface of the glass.
BPD8 - 8" Bak-to-Bak Pull Solid

3/4" Diameter Solid Brass Construction

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
We offers a selection of Solid Brass Shower Door Pull Handles in either Back-to Back or Single-Sided styles, with a choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (31.8 millimeter) diameter metal washers. The handle requires 1/2 inch holes in the glass, and stands 2-1/2 inches off the surface of the glass.
BPD8 - 8" Bak-to-Bak Pull Solid

3/4" Diameter Solid Brass Construction

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
We offers a selection of Solid Brass Shower Door Pull Handles in either Back-to Back or Single-Sided styles, with a choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (31.8 millimeter) diameter metal washers. The handle requires 1/2 inch holes in the glass, and stands 2-1/2 inches off the surface of the glass.
BPS6 - 6" Sgl-Side Pull Solid

3/4" Diameter Solid Brass Construction

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
We offers a selection of Solid Brass Shower Door Pull Handles in either Back-to Back or Single-Sided styles, with a choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (31.8 millimeter) diameter metal washers. The handle requires 1/2 inch holes in the glass, and stands 2-1/2 inches off the surface of the glass.
BPS8 - 8" Sgl-Side Pull Solid

3/4" Diameter Solid Brass Construction

Through the glass assembly
Designed for 1/4" to 1/2" Glass
Three Year Warranty
 
We offers a selection of Solid Brass Shower Door Pull Handles in either Back-to Back or Single-Sided styles, with a choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (31.8 millimeter) diameter metal washers. The handle requires 1/2 inch holes in the glass, and stands 2-1/2 inches off the surface of the glass.

Designed for 3/8" or 1/2" glass

Heavy Duty Hinge - Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Cathedral Series of professional frameless shower door hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. A variety of four styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Cathedral Series Hinge combines a unique two-tone accent design with a positive hold cut-out and through-stud system. The Cathedral Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5░ offset door closure.
Color Chip

Color Chips Available in All Finishes

 
This shower door hardware finish chip is a very convenient way to assist you in selecting the right finish for your bathroom. Chips are available for all of our finishes, but not all hardware is available in every finish.
044 Classique Hinge . . ( 31 max )

Designed for 5/16" or 3/8" glass

Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Classique Series of professional frameless shower door hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A wide variety of five styles, which includes Wall Mount and Glass-to-Glass types, provides design versatility and enables the designer/installer to develop custom enclosures restricted only by their imagination. The Classique Shower Door Hinge is a style besides basic hinges. Beautiful round layout and beveled edges are the end result of an performer's unique notion of the perfect hinge for decors with durable curved and contoured influences. There are five distinct models, including a Flush Back Plate Wall Mount Hinge for clean exterior sight lines. The Classique's beveled edges generate an excellent presentation of smooth desgn, while the solid brass construction ensures superior top quality and long life.
074 Elite Hinge . . . . . . ( 34 max )

Designed for 3/8" or 1/2" glass

Self-Centering - Swings: 90░ in and 90░ out
Solid Brass Construction w/ Stainless Steel Springs & Pin
Three Year Warrenty
 
The Elite Series of professional shower door hinges is able to accommodate 3/8 to 1/2 inch heavy tempered security glass. The Elite Series is a high quality hinge for the broader and heavier glass doors. Unlike most other hinges, the Elite can be side installed on the top and bottom corners of the door, or anywhere in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Sequence offers a similar inside mechanism as our popular Geneva Series and consists of a Reversible Pivot Pin for optional 5░ offset door closure.

Designed for 3/8" or 1/2" glass

Self-Centering - Swings: 90░ in and 90░ out
Solid Brass Construction w/ Stainless Steel Springs & Pin
Three Year Warrenty
 
The Elite Series of professional shower door hinges is capable to accommodate 3/8 to 1/2 inch thick tempered safety glass. The Elite Series is a premium hinge for the bigger and heavier glass doors. In contrast to most other hinges, the Elite might be side installed on the top and bottom corners of the door, or anyplace in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud which eliminates slippage. The Elite Series offers a similar interior mechanism as our well-liked Geneva Series and contains a Reversible Pivot Pin for optional 5░ offset door closure.

Designed for 3/8" or 1/2" glass

Self-Closing - Swings: 90░ in and 90░ out
Solid Brass Construction w/ Stainless Steel Springs & Pin
Three Year Warrenty
 
The Elite Series of professional shower door hinges is able to accommodate 3/8 to 1/2 inch thick tempered safety glass. The Elite Series is a top quality hinge for the bigger and heavier glass doors. Not like most various hinges, the Elite may be side fitted on the top and bottom corners of the door, or wherever in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Series offers the same internal mechanism as our popular Geneva Series and incorporates a Reversible Pivot Pin for optional 5░ offset door closure.

Designed for 3/8" or 1/2" glass

Self-Closing - Swings: 90░ in and 90░ out
Solid Brass Construction w/ Stainless Steel Springs & Pin
Three Year Warrenty
 
The Elite Series of professional shower door hinges is capable to accommodate 3/8 to 1/2 inch heavy tempered security glass. The Elite Series is a high quality hinge for the bigger and heavier glass doors. As opposed to most various hinges, the Elite can be side secured on the top and bottom corners of the door, or anyplace in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Sequence offers the same interior mechanism as our popular Geneva Series and consists of a Reversible Pivot Pin for optional 5░ offset door closure.

Designed for 3/8" or 1/2" glass

Self-Closing - Swings: 90░ in and 90░ out
Solid Brass Construction w/ Stainless Steel Springs & Pin
Three Year Warrenty
 
The Elite Series of professional shower door hinges is able to accommodate 3/8 to 1/2 inch thick tempered safety glass. The Elite Series is a high quality hinge for the bigger and heavier glass doors. In contrast to most various hinges, the Elite might be side secured on the top and bottom corners of the door, or wherever in-between. Containing a positive three-screw clamping system, the Elite Hinge incorporates a cut-out and through-stud that eliminates slippage. The Elite Series offers the same inside system as our well-liked Geneva Series and includes a Reversible Pivot Pin for optional 5░ offset door closure.
037 Estate Hinge . . . . ( 26 max )

Designed for 3/8 or 1/2 Glass

Self-Centering - Swings: 90░ in and 90░ out
Solid Brass Construction w/ Stainless Steel Springs & Pin
Standard Duty Hinge
Three Year Warrenty
 
The Estate Series of professional frameless shower door hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of 4 styles, such as Wall Mount and Glass-to-Glass types, offers layout flexibility and allows the designer/installer to produce custom enclosures restricted only by their imagination. These superbly finished solid brass forged Estate Hinges make it feasible to mount 3/8 to 1/2 inch (10 to 12 millimeter) heavy shower doors with no surrounding frames, so the doorway has a virtually "floating" appearance. The Estates heavy-duty stainless metal springs let the door to swing 90░ in and 90░ out. A friction cam allows the door to be securely maintained in any position, other than when within 15░ of the shut position, where it is tapered to aid in centering the door.
Estate Glass Connector

Designed for 3/8 or 1/2 Glass

Solid Brass Construction
Holes required
 
This Estate 90░ Glass Clamp has attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 90░.

Designed for 3/8" or 1/2" glass

Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Estate Series of professional frameless shower door hinges are able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. An assortment of four styles, which includes Wall Mount and Glass-to-Glass types, gives style versatility and enables the designer/installer to develop custom enclosures limited only by their imagination. These superbly finished, solid brass cast Estate Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) heavy shower doors without surrounding frames, so the door has a nearly "floating" appearance. The Estates heavy-duty stainless metal springs permit the door to swing 90░ in and 90░ out. A friction cam allows the door to be firmly maintained in any position, other than when inside 15░ of the closed position, where it is tapered to assist in centering the door.

Designed for 3/8" or 1/2" glass

Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Estate Series of professional frameless shower door hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered security glass. A wide variety of four styles, which includes Wall Mount and Glass-to-Glass types, provides layout versatility and will allow the developer/installer to develop custom enclosures constrained solely by their imagination. These superbly finished, solid brass cast Estate Hinges make it feasible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost "suspended" appearance. The Estates heavy-duty stainless metal springs let the door to swing 90░ in and 90░ out. A friction cam allows the door to be firmly maintained in any position, except when inside 15░ of the shut position, where it is tapered to help in centering the door.
Square Shelf Clamp

Fits 5/16" to 3/8" Glass

No Hole in Glass
Available in 9 Finishes
Solid Brass Construction
Three Year Warranty
 
Solid Brass Interior Shelf Clamps can be used to secure a shelf for shampoo bottles or other lightweight shower articles. Clamps should be secured to wall with screws (not included) in studs, or with Molly-type anchors. Nylon tip brass tension screws secure the glass. Maximum five inch glass protrusion from wall is recommended. Clamps will hold 5/16 to 3/8 inch glass, with no glass holes
Half-Round Shelf Clamp

Fits 5/16" to 3/8" Glass

No Hole in Glass
Available in 9 Finishes
Solid Brass Construction
Three Year Warranty
 
Solid Brass Interior Shelf Clamps can be used to secure a shelf for shampoo bottles or other lightweight shower articles. Clamps should be secured to wall with screws (not included) in studs, or with Molly-type anchors. Nylon tip brass tension screws secure the glass. Maximum five inch glass protrusion from wall is recommended. Clamps will hold 5/16 to 3/8 inch glass, with no glass holes
GCB135 - 135░ Triditional Gls-to-Gls Clamp

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Requires Holes
 
These 135░ Glass Clamps have attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 135░.
GCB180 - 180░ Triditional Gls-to-Gls Clamp

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
No Requires Holes
 
Traditional 180░ Glass Clamps are ideal for fixed transom or inline panel installations in frameless shower enclosures. Panels can be notched to give a tighter glass to glass spacing.
GCB182 - Y Inline Glass Clamp

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Secure Edge Mounting
 
This dual purpose Traditional 180░ Split Face and "Y" Inline Glass Clamp can be used to connect glass panels inline, or as a "Y" Clamp to fasten glass panels flush with edge of marble or tile walls. Solid brass Clamp includes extra screw for use in "Y" configuration.

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Two Glass Holes Required
 
Double Stud Glass Clamps allow two inline glass panels to be connected together. A hole through each piece of glass privides extra stability and security.

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Two Glass Holes Required
 
Double Stud Glass Clamps allow two inline glass panels to be connected together. A hole through each piece of glass privides extra stability and security.

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Two Glass Holes Required
 
Double Stud Glass Clamps allow two inline glass panels to be connected together. A hole through each piece of glass privides extra stability and security.
GCB184 - Double Stud 180░ Clamp

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Two Glass Holes Required
 
Double Stud Glass Clamps allow two inline glass panels to be connected together. A hole through each piece of glass privides extra stability and security.
GCB186 - Wall Mount Transom Clamp

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Three Year Warranty
 
Movable Wall Mounted Transom Clamps can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure.
GCB188 - Glass-to-Glass Transom Clamp

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Three Year Warranty
 
This Movable Glass-to-Glass Transom Clamp can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure.
GCB188 - Glass-to-Glass Transom Clamp

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Three Year Warranty
 
This Movable Glass-to-Glass Transom Clamp can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure.

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Three Year Warranty
 
This Movable Glass-to-Glass Transom Clamp can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure.
GCB335 - 135░ Transom Clamp

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Through the Glass Mounting
 
These 135░ Movable Transom Clamps have attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 135░.
90 Degree Clamp and Bracket

For 5/16" to 3/8" Thick Glass

Solid Brass Construction
Requires Holes
 
The Traditional Standard 90░ Glass Clamps are a truly versatile clamp that have two uses: as a 90░ Clamp for vertical fixed panels in glass shower enclosures; as a bracket for horizontal glass shelves within the enclosure. Clamp design allows for flush mounting of shelf to wall, or for adjoining panels to meet with a minimal gap.
90 Degree Large Clamp and Bracket

For 5/16" to 1/2" Thick Glass

Solid Brass Construction
Requires Holes
 
The Oversized 90░ Glass Clamps are especially suggested for use in 1/2 inch (12.7 millimeter) thick glass installations where a hole drilling measurement of 1-1/2 times the glass thickness is required by the Temperer (from the edge of the glass to the closet edge of the hole.
037 Geneva Hinge . . . ( 28 max )

For 3/8" or 1/2" Glass

Solid Brass Construction
Self-centering within 15░ of closed position
Safety Lock Cutout
Three Year Warranty
 
The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.They are made of solid brass with all moving parts (pins and springs) in stainless steel.Geneva Hinges are self-centering, and contain a Reversible 5░ Pivot Pin. To accommodate "off angle" installations we have an ajustable angle version of the hinge.

Use with 3/8" or 1/2" glass

Solid Brass Construction
Self-Centering design
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Offset Back Plate allows for a clean sight line from the shower exterior. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.
044 Geneva Hinge . . . ( 28 max )

Use with 3/8" or 1/2" glass

Solid Brass Construction
Self-Centering design
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Offset Back Plate allows for a clean sight line from the shower exterior. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.
135 Geneva Hinge . . . ( 28 max )

For 3/8" or 1/2" Glass

Self Centering Design
Solid Brass Construction
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
These new Geneva 045 Series 135░ Glass-to-Glass Hinges are used in conjunction with the appropriate Geneva Pony Wall Mount Hinge for a 135░ angle. Geneva Hinges are self-centering, and contain a reversible 5░ Pivot Pin. Made of solid brass with all moving parts (pins and springs) in stainless steel.
074 Geneva Hinge . . . ( 28 max )

Designed for 3/8 or 1/2 Glass

Solid Brass Construction
Self-centering when within 15░ of closed position
Hinge Swings: 90░ in and 90░ out
Three Year Warrenty
 
The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The cut-out with the short Back Plate allows glass to be closer to the wall. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5║ Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations.
092 Geneva Hinge . . . ( 28 max )

For 3/8" or 1/2" Glass

Self Centering Design
Self-centering within 15░ of closed position
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
The Geneva 092 Series 90░ Glass-to-Glass Hinges replace the old style Geneva 090 Series 90░ Glass-to-Glass Hinge which required a cut-out in both the door and the fixed panel. This new style requires only two holes (per hinge) in the fixed panel, and a cut-out in the door.
180 Geneva Hinge . . . ( 28 max )

Use with 3/8" or 1/2" glass

Solid Brass Construction
Self-centering within 15░ of closed position
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.
337 Geneva Adj. Hinge

Use with 3/8" or 1/2" glass

Solid Brass Construction
Self-centering within 15░ of closed position
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
The Geneva Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90░) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0░. The door can swing 90░ inward and also 90░ outward (adjusting angle from factory set position will reduce 90░ swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5░ inside the shower area, thus having the door close snugly against the jamb.
337 Geneva Adj. Hinge

Use with 3/8" or 1/2" glass

Solid Brass Construction
Self-centering within 15░ of closed position
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
The Geneva Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90░) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0░. The door can swing 90░ inward and also 90░ outward (adjusting angle from factory set position will reduce 90░ swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5░ inside the shower area, thus having the door close snugly against the jamb.

Use with 3/8" or 1/2" glass

Solid Brass Construction
Self-centering within 15░ of closed position
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
The Geneva Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90░) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0░. The door can swing 90░ inward and also 90░ outward (adjusting angle from factory set position will reduce 90░ swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5░ inside the shower area, thus having the door close snugly against the jamb.
380 Geneva Adj. Hinge

Use with 3/8" or 1/2" glass

Solid Brass Construction
Self-centering within 15░ of closed position
Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
The Geneva Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90░) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0░. The door can swing 90░ inward and also 90░ outward (adjusting angle from factory set position will reduce 90░ swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5░ inside the shower area, thus having the door close snugly against the jamb.
SAT.BRS.5 DEG.WL.MNT.GEN.HINGE

Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
SAT.BRS.5DEG/135 GTG.GEN.HINGE

Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
SAT.BRS.5 DEG.FM.GENEVA HINGE

Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
SAT.BRS.5 DEG.GL/GL.GEN.HINGE

Hinge Swings: 90░ in and 90░ out
Three Year Warranty
 
18" Geneva Style Wall Towel Bar

Matches Geneva Hinges

Solid Brass Construction
Wall Mount
Three Year Warranty
 
This Geneva Series Towel Bar comes in 18 and 24 inch (457 and 610 millimeter) lengths with brackets styled to complement our popular Geneva Series Hinges. Bar measures 5/8 inch (16 millimeter) in diameter. Concealed fasteners included.
Geneva Style Towel Ring

Matches Geneva Hinges

Easy to Install
Three Year Warranty
 
This Geneva Series Towel Ring is designed with a 6 inch (152 millimeter) diameter ring which has a single bracket styled to complement our popular Geneva Series Hinges. Concealed fastener included.
Geneva Tumbler Holder

Matches Geneva Hinges

Wall Mount
Easy to Install
Three Year Warranty
 
This Geneva Series Toothbrush Holder has a 4-3/4 inch (120 millimeter) tall clear glass tumbler which rests in a wall-mounted support that complements our popular Geneva Series Hinges. Concealed fastener included.
180 Grande Hinge . . . ( 31 max )

Can be Side Mounted at Top and Bottom

Solid Brass Construction
3 Year Warranty
Designed for 5/16 to 3/8 Glass
 
The Grande Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Grande Hinge incorporates a larger mounting surface to provide superior support for frameless shower doors. The beveled edges are an attractive accent to Grande's strong rectangular design, and the Offset Back Plate Wall Mount Model gives a clean exterior appearance. Grande Hinges can be mounted on the top and bottom corners of the door, or anywhere in-between. Grande is constructed of solid brass for years of reliable service.
SAT.BRS.WL.MNT.JR.GENEVA HINGE

1/4" to 5/16" Glass

Swings 90░ in and 90░ out
Solid Brass Construction
5░ Reversible Stainless Pivot Pin
Three Year Warranty
 
The Junior Geneva Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90░, 135░ and 180░ Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5░ offset door closure.
SAT.BRS.135 DEG.JR.GENEVA HNGE

1/4" to 5/16" Glass

Swings 90░ in and 90░ out
Solid Brass Construction
5░ Reversible Stainless Pivot Pin
Three Year Warranty
 
The Junior Geneva Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90░, 135░ and 180░ Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5░ offset door closure.
SAT.BRS.180 DEG.JR.GENEVA HNGE

1/4" to 5/16" Glass

Swings 90░ in and 90░ out
Solid Brass Construction
5░ Reversible Stainless Pivot Pin
Three Year Warranty
 
The Junior Geneva Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The same elegant European design that has made our Geneva Series so popular is available in a smaller version, the Junior Geneva, to offer additional application opportunities. Used to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) thick glass, the Junior Geneva is made of solid brass. There are three Wall Mount styles along with 90░, 135░ and 180░ Glass-to-Glass styles. The Junior Geneva is self-centering and available in seven popular finishes. They contain a Reversible Pivot Pin for optional 5░ offset door closure.
037 Pinnacle Hinge ... ( 28 max )

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
 
The Pinnacle Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 10 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.
044 Pinnacle Hinge ... ( 28 max )

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
 
The Pinnacle Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 10 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
 
The Pinnacle Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 10 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.
045 Pinnacle Hinge ... ( 28 max )

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
 
The Pinnacle Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 10 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
 
The Pinnacle Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 10 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.
092 Pinnacle Glass to Glass Hinge

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
 
The Pinnacle Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 10 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.
180 Pinnacle Hinge ... ( 28 max )

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
 
The Pinnacle Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 10 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible 5░ Pivot Pin.
337 Pinnacle Ajustable Wall Hinge

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Adjustment up to 90░
 
The Pinnacle Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Pinnacle Adjustable Series has taken our popular Pinnacle Series to a new level. Adjustment to accommodate the angle desired (up to 90░) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0░. The door can swing 90░ inward and also 90░ outward (adjusting angle from factory set position will reduce 90░ swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5░ inside the shower area, thus having the door close snugly against the jamb.
380 Pinnacle Ajustable Gls to Gls Hinge

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
 
The Pinnacle Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Pinnacle Adjustable Series has taken our popular Pinnacle Series to a new level. Adjustment to accommodate the angle desired (up to 90░) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0░. The door can swing 90░ inward and also 90░ outward (adjusting angle from factory set position will reduce 90░ swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5░ inside the shower area, thus having the door close snugly against the jamb.
SATBRS.5 DEG.GG.PINNACLE HINGE

 
Prima Pivot Hinge (3/8" Glass)

Self-Centering when within 15║ of closed position

Solid Brass Construction with Stainless Steel Pin & Springs
For 3/8" Tempered Glass
Two Screw Attachement
Three Year Warranty
 
The Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Prima Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
PPH02 Prima Gls-to-Gls Pivot Hinge

Self-Centering when within 15║ of closed position

Solid Brass Construction with Stainless Steel Pin & Springs
For 3/8" Tempered Glass
Two Screw Attachement
Three Year Warranty
 
The Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Prima Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
PPH03 Prima Wall Mount Pivot Hinge

Self-Centering when within 15║ of closed position

Solid Brass Construction with Stainless Steel Pin & Springs
For 3/8" Tempered Glass
Two Screw Attachement
Three Year Warranty
 
The Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Prima Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
PPH04 Prima Inline Panel Pivot Hinge

Self-Centering when within 15║ of closed position

Solid Brass Construction with Stainless Steel Pin & Springs
For 3/8" Tempered Glass
Two Screw Attachement
Three Year Warranty
 
The Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Prima Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
PPH05 Prima Offset Wall Pivot Hinge

Self-Centering when within 15║ of closed position

Solid Brass Construction with Stainless Steel Pin & Springs
For 3/8" Tempered Glass
Two Screw Attachement
Three Year Warranty
 
The Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Prima Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
PPH05 Prima Offset Wall Pivot Hinge

Self-Centering when within 15║ of closed position

Solid Brass Construction with Stainless Steel Pin & Springs
For 3/8" Tempered Glass
Two Screw Attachement
Three Year Warranty
 
The Prima Series of professional hinges is able to accommodate 5/16 to 3/8 inch tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts in stainless steel. Prima Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Prima Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
135 Roman Gls to Gls Clamp

Designed for 5/16" or 1/2" Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Roman Style 135░ Glass Clamp has attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 135░.
135 Roman Gls to Gls Clamp

Designed for 5/16" or 1/2" Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Roman Style 135░ Glass Clamp has attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 135░.
Roman Style Single Stud 180░ Clamp

Designed for 5/16" or 1/2" Glass

Solid Brass Construction
No Holes Required
Three Year Warrenty
 
This Roman Series 180 Degree Glass-to-Glass Single Stud Clamps have rounded corners for a "softer" look. Used to connect two fixed glass panels meeting inline. When no holes are used there is a 13/32 in. gap between the glass. If the glass is notched around the stud the gap between the glass can be set at 1/16 inch.
90 Crown Gls-to-Gls Clamp

 
45║ Support Bar Bracket

Fits 3/4" tube

Solid Brass Construction
 
The Support Bar Mitered Bracket is designed to attach to the wall by slipping over a screw mounted stud that is secured into the wall. Perfect for retrofitting enclosures with an inline panel needing to be secured to an adjacent wall for stability. The Bracket is used in conjunction with the Fixed Panel Support Bar appropriate for your application. Screws into wall and fits on the end of the Support Bar.
Satin Brass Anod. 1/2" U-Channel

Fits 1/2" Glass

Matches all of the popular hardware finishes
Ideal For Fixed Panel Install
98" Stock Lengths
 
We offer two profiles of Aluminum U-Channels for shower door installations. The fixed panel standard and low U-Channels are for securing fixed panels of glass to the wall, ceiling or floor. The U Channels are available in all of the popular finishes.
Antique Brushed Copper Anod. 1/2" U-Channel

Fits 1/2" Glass

Matches all of the popular hardware finishes
Ideal For Fixed Panel Install
98" Stock Lengths
 
We offer two profiles of Aluminum U-Channels for shower door installations. The fixed panel standard and low U-Channels are for securing fixed panels of glass to the wall, ceiling or floor. The U Channels are available in all of the popular finishes.
Satin Brass Anod. 1/2" U-Channel

Fits 1/2" Glass

Matches all of the popular hardware finishes
Ideal For Fixed Panel Install
98" Stock Lengths
 
We offer two profiles of Aluminum U-Channels for shower door installations. The fixed panel standard and low U-Channels are for securing fixed panels of glass to the wall, ceiling or floor. The U Channels are available in all of the popular finishes.
Brushed Nickel Finish U-Channel for 3/8"

Fits 3/8" G;ass

Matches all of the popular hardware finishes
98" Stock Lengths
Ideal For Fixed Panel Install
 
We offer two profiles of Aluminum U-Channels for shower door installations. The fixed panel standard and low U-Channels are for securing fixed panels of glass to the wall, ceiling or floor. The U Channels are available in all of the popular finishes.
Satin Brass U-Channel for 3/8"

Fits 3/8" G;ass

Matches all of the popular hardware finishes
98" Stock Lengths
Ideal For Fixed Panel Install
 
We offer two profiles of Aluminum U-Channels for shower door installations. The fixed panel standard and low U-Channels are for securing fixed panels of glass to the wall, ceiling or floor. The U Channels are available in all of the popular finishes.
037 Concord Hinge . . .( 26 max )

Designed for 3/8" or 1/2" glass

Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Concord Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost "floating" appearance. The Concords heavy- duty stainless steel springs allow the door to swing 90░ in and 90░ out. A friction cam allows the door to be firmly maintained in any position, except when within 15░ of the closed position, where it is tapered to assist in centering the door.
90 Concord Hinge . . .( 26 max )

Designed for 3/8" or 1/2" glass

Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Concord Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost "floating" appearance. The Concords heavy- duty stainless steel springs allow the door to swing 90░ in and 90░ out. A friction cam allows the door to be firmly maintained in any position, except when within 15░ of the closed position, where it is tapered to assist in centering the door.
135 Concord Hinge . . .( 26 max )

Designed for 3/8" or 1/2" glasss

Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Concord Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost "floating" appearance. The Concords heavy- duty stainless steel springs allow the door to swing 90░ in and 90░ out. A friction cam allows the door to be firmly maintained in any position, except when within 15░ of the closed position, where it is tapered to assist in centering the door.
180 Concord Hinge .. ( 26 max )

Designed for 3/8" or 1/2" glass

Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Concord Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost "floating" appearance. The Concords heavy- duty stainless steel springs allow the door to swing 90░ in and 90░ out. A friction cam allows the door to be firmly maintained in any position, except when within 15░ of the closed position, where it is tapered to assist in centering the door.
98" Deluxe Shower Door Header Kit

Cut to Fit 98" Long

Secures Shower Enclosure Not Going to Ceiling
Snap-In Filler Insert for Door Pocket Included
Three Year Warranty
 
The Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are designed to allow installers to do in-house fabrication using a selection of component parts. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90║, 135║ or Adjustable Corners are sold separately. Also Available is a special Adapter Block for use on pivot hinge installations. A 2-1/4 inch (57.2 millimeter) Blank Mounting Bracket is offered for installations when the Header does not meet the wall at 90║, and the standard Wall Mounting Brackets cannot be used. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges.
SDK100 - Traditional Bak-to-Bak knob

Designed for 1/4" - 1/2" glass

Solid Brass Construction
1/2 in. Hole Required
Three Year Warranty
Extends 1" from Surface
 
These Solid Brass Traditional Style Knobs are available in many popular finishes. Overall diameter of knob is 1-9/16 inches, overall height is one inch from glass. Combine a single-sided knob with a single sided towel bar to give an inside pull with an outside towel bar to create an elegant functional door hardware solution.
SDK106 - Contemporary Bak-to-Bak knob

Designed for 1/4" - 1/2" glass

Solid Brass Construction
1/2 in. Hole Required
Three Year Warranty
 
These Solid Brass Contemporary Style Knobs are available in many popular finishes. Overall diameter of knob is 1-3/16 inches, overall height is 1-3/16 inches from glass. Combine a single-sided knob with a single sided towel bar to give an inside pull with an outside towel bar to create an elegant functional door hardware solution.
SDK109 - Bow-Tie Bak-to-Bak knob

Designed for 1/4" - 1/2" glass

Solid Brass Construction
1/2 in. Hole Required
Three Year Warranty
 
This Back-to-Back Bow-Tie Knob is constructed of solid brass and is designed with a concave gripping surface that provides a comfortable feel when opening or closing the shower door. Each side of the knob measures 1-1/2 inches in length, and has a 1-1/4 inches diameter. Requires a 3/8 or 1/2 inch diameter hole for installation.
SDK112 - Cylinder Bak-to-Bak knob

Designed for 1/4" - 1/2" glass

Solid Brass Construction
1/2 in. Hole Required
Three Year Warranty
 
This solid brass Cylinder Style Knob comes in many beautiful finishes. Knobs measure 11/16 inches diameter and stand 1-3/16 inch from the door surface.
SDK200 - Traditional Single-Side Knob

Designed for 1/4" - 1/2" glass

Solid Brass Construction
1/2 in. Hole Required
Three Year Warranty
 
These Solid Brass Traditional Style Knobs are available in many popular finishes. Overall diameter of knob is 1-9/16 inches, overall height is one inch from glass. Combine a single-sided knob with a single sided towel bar to give an inside pull with an outside towel bar to create an elegant functional door hardware solution.
SDK206 - Contempory Single Side Knob

Designed for 1/4" - 1/2" glass

Solid Brass Construction
1/2 in. Hole Required
Three Year Warranty
 
This solid brass Contemporary Style Knob comes in several beautiful finishes. Knobs measure 1-3/16 inch diameter and stand 1-3/16 inch from the door surface. End cap for Single-Sided Knob stands 1/4 inch from the door surface.
SDK212 - Cylinder Single Side Knob

Designed for 1/4" - 1/2" glass

Solid Brass Construction
1/2 in. Hole Required
 
These solid brass Contemporary Style Knobs come in 9 beautiful finishes. Knobs measure 11/16 inch (17 millimeter) diameter and stand 1-3/16 inch (30 millimeter) from the door surface. End cap for Single-Sided Knob stands 1/4 inch (6 millimeter) from the door surface.
SDP6TB12 - 6" x 12" Pull +Towel Bar

Fits 1/4" to 1/2" Thick Glass

Heavy Wall 3/4" Brass Tubing
Through the glass Mounting
Three Year Warranty
 
These attractive Pull and Towel Bar Sets come with all the hardware needed for installation. They are constructed of heavy brass tubing. Each set consists of one towel bar and one pull, six metal and 12 nylon washers, and two knobs. Thirteen attractive finishes for six inch Pull Sets, four finishes for 12 inch Pull Sets. They fit glass thicknesses from 1/4 to 1/2 inch . Requires 1/2 inch diameter holes to install.
SDP6TB18 - 6" x 18" Pull +Towel Bar

Fits 1/4" to 1/2" Thick Glass

Heavy Wall 3/4" Brass Tubing
Through the glass Mounting
Three Year Warranty
 
These attractive Pull and Towel Bar Sets come with all the hardware needed for installation. They are constructed of heavy brass tubing. Each set consists of one towel bar and one pull, six metal and 12 nylon washers, and two knobs. Thirteen attractive finishes for six inch Pull Sets, four finishes for 12 inch Pull Sets. They fit glass thicknesses from 1/4 to 1/2 inch . Requires 1/2 inch diameter holes to install.
SDP6TB24 - 6" x 24" Pull +Towel Bar

Fits 1/4" to 1/2" Thick Glass

Heavy Wall 3/4" Brass Tubing
Through the glass Mounting
Three Year Warranty
 
These attractive Pull and Towel Bar Sets come with all the hardware needed for installation. They are constructed of heavy brass tubing. Each set consists of one towel bar and one pull, six metal and 12 nylon washers, and two knobs. Thirteen attractive finishes for six inch Pull Sets, four finishes for 12 inch Pull Sets. They fit glass thicknesses from 1/4 to 1/2 inch . Requires 1/2 inch diameter holes to install.
SDPC575 - 5 1/4" Bak-to-Bak Pull Circular

Fits 1/4" to 1/2" Thick Glass

Heavy Wall 3/4" Brass Tubing
Through the glass Mounting
Three Year Warranty
 
Tubular Circular Style Door Pulls are made of a heavy wall brass tubing to match hinge hardware. Consists of one pull for each side of the door. Brass back-up washers and nylon spacer washers prevent glass-to-metal contact. Available in one size only.
SDPR6 - 6" Bak-to-Bak Pull w/ washers

Fits 1/4" to 1/2" Thick Glass

Heavy Wall Brass Tubing
Through the glass Mounting
Three Year Warranty
 
These 6" Tubular Back-to-Back 3/4" Diameter Shower Door Pull Handles are constructed of heavy wall brass tubing. Brass 1-1/4 inch back-up washers and nylon spacer to prevent metal to glass contact.This series of handles comes in 19 elegant finishes.
SAT.BRS.10X2 FHP SCREWS 4/PK

#10 X 2" Wall Mounting Flat Head Phillips

Package of Four
Replacement Wall Mount Hinge Screws
 
Stainless Steel Replacement Screws for Shower Door Hinges are available for all of our Shower Door Hinges. These decorative #10 x 2" Flat Head phillips screws are packaged four to a pack. Always use a use a good condition #2 screw driver when installing.
SAT.BRASS 5X12 FHP SCREWS 8/PK

 
SAT.BRASS 6X12 FHP SCREWS 2/PK

Stainless Steel Hinge Plate Replacement Screws

Two Screw Package
Available in All Finishes
 
Hinge Clamping Plate Screws are available in all finishes for all of our Shower Door Hinges. Conveniently packaged, these screws should be ordered and kept in inventory for those emergency situations where an immediate response is required
SAT.BRS.6X15 FHP SCREWS 8/PK

 
SDTB12X12 - 12" Towel Bar bk-to-bk + Washers

Heavy Brass Construction with Washers

Use on 1/4 in. to 1/2 in. Glass
Through the Glass Mounting
1/2 in Holes Required
 
These Towel Bars are for back to back mounting on opposite sides of the glass. Each set is made from 3/4" diameter heavy brass tubing, and includes decorative washers for both sides of the glass. Requires a two 1/2 in. holes in the glass.
SDTB18X18 - 18" Towel Bar bk-to-bk + Washers

Heavy Brass Construction with Washers

Use on 1/4 in. to 1/2 in. Glass
Through the Glass Mounting
1/2 in Holes Required
 
These Towel Bars are for back to back mounting on opposite sides of the glass. Each set is made from 3/4" diameter heavy brass tubing, and includes decorative washers for both sides of the glass. Requires a two 1/2 in. holes in the glass.
SDTB18X18 - 18" Towel Bar bk-to-bk + Washers

Heavy Brass Construction with Washers

Use on 1/4 in. to 1/2 in. Glass
Through the Glass Mounting
1/2 in Holes Required
 
These Towel Bars are for back to back mounting on opposite sides of the glass. Each set is made from 3/4" diameter heavy brass tubing, and includes decorative washers for both sides of the glass. Requires a two 1/2 in. holes in the glass.

Heavy Brass Construction with Washers

Use on 1/4 in. to 1/2 in. Glass
Through the Glass Mounting
1/2 in Holes Required
 
This Towel Bars is a Single Sided towel bar for mounting on the glass. Each set is made from 3/4" diameter heavy brass tubing, and includes decorative washers for both sides of the glass. Requires a two 1/2 in. holes in the glass.
SDTBS18 - 18" Single-Sided Towel Bar

Heavy Brass Construction with Washers

Use on 1/4 in. to 1/2 in. Glass
Through the Glass Mounting
1/2 in Holes Required
 
This Towel Bars is a Single Sided towel bar for mounting on the glass. Each set is made from 3/4" diameter heavy brass tubing, and includes decorative washers for both sides of the glass. Requires a two 1/2 in. holes in the glass.
SDTBS24 - 24" Single-Sided Towel Bar

Heavy Brass Construction with Washers

Use on 1/4 in. to 1/2 in. Glass
Through the Glass Mounting
1/2 in Holes Required
 
This Towel Bars is a Single Sided towel bar for mounting on the glass. Each set is made from 3/4" diameter heavy brass tubing, and includes decorative washers for both sides of the glass. Requires a two 1/2 in. holes in the glass.
SGC90 - Square 90░ Glass-to-Glass Clamp

Fits 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square 90░ Glass-to-Glass Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass panels that meet at a 90░ angle.
SGCU1 - Square Style Heavy Duty U Clamp

Fits 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square Wall Mount Clamp mounts directly to the wall, ceiling or floor to secure vertical fixed glass panels. Clearance between the glass and wall is from 1/16 to 3/16 inch (2 to 5 millimeters). Clear silicone can be used to seal the gap and provide a clean, water-tight appearance
SPH8 - 8" Bk to Bk Pull+Washers Solid

Fits 1/4 in. to 1/2 in. Thick Glass

Hole Diameter Required: 1/2 Inch
Solid Brass Construction
Three Year Waranty
 
These Solid Brass Pull Handles offer a selection of Back-to Back or Single-Sided styles, with choice of an economical in.no washer in. type, or the traditional style pull with 1-1/4 inch diameter metal washers.The Back-To-Back Handle includes a pull for each side of the door, and is commonly used frameless shower door applications.The Single-Sided Handle has a 1/8 inch protruding end cap, and is commonly used for by-passing doors, cabinets and wardrobe doors.All Pull Handles are offered in a choice of 6 and 8 inch sizes, and are stocked in finishes to match most bathroom decors.

Top and Bottom Mount Design Allows More Glass Exposure

Hinge Swings: Full Rotation
Solid Brass Construction
 
Senior Prima Pivot Hinge (1/2" Glass)

Top and Bottom Mount Design Allows More Glass Exposure

Hinge Swings: Full Rotation
Solid Brass Construction
 
The Senior Prima Series of professional hinges is able to accommodate 1/2 inch thick tempered safety glass. A variety of two styles, Top and Bottom Mount and Glass-to-Glass types, gives design flexibility.Advantages of the Senior and Junior Prima Hinges include the fact that they carry the majority of the weight on the bottom and have the ability to be inset from the wall, enabling clearance for towel bars and other projections.The Glass-to-Glass Top Pivot Hinge is used for doors having fixed transoms. Placed vertically, either style can be used in movable transom installations. These Pivot Hinges are self-centering, with four springs for maximum retention strength.
02 Senior Prima Gls-to-Gls Pivot Hinge

Top and Bottom Mount Design Allows More Glass Exposure

Hinge Swings: Full Rotation
Solid Brass Construction
 
The Senior Prima Series of professional hinges is able to accommodate 1/2 inch thick tempered safety glass. A variety of two styles, Top and Bottom Mount and Glass-to-Glass types, gives design flexibility.Advantages of the Senior and Junior Prima Hinges include the fact that they carry the majority of the weight on the bottom and have the ability to be inset from the wall, enabling clearance for towel bars and other projections.The Glass-to-Glass Top Pivot Hinge is used for doors having fixed transoms. Placed vertically, either style can be used in movable transom installations. These Pivot Hinges are self-centering, with four springs for maximum retention strength.
SSP6 - 6" Sgl-Side Pull + Washers Soild

Solid Brass Construction

Fits 1/4 in. to 1/2 in. Thick Glass
Through the glass mounting
6" Center-to-Center Hole Spacing
 
These Solid Brass Pull Handles offer a selection of Back-to Back or Single-Sided styles, with choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (31.8 millimeter) diameter metal washers.
SSP6 - 6" Sgl-Side Pull + Washers Soild

Solid Brass Construction

Fits 1/4 in. to 1/2 in. Thick Glass
Through the glass mounting
6" Center-to-Center Hole Spacing
 
These Solid Brass Pull Handles offer a selection of Back-to Back or Single-Sided styles, with choice of an economical "no washer" type, or the traditional style pull with 1-1/4 inch (31.8 millimeter) diameter metal washers.
Wall-to-Glass Support Bar

Material: 3/4 inch Diameter Tubular Brass Bar, Solid Brass End Caps

Glass Thickness Range: 1/4 to 5/16 inch Tempered Safety Glass
 
The Fixed Panel Support Bar will stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling.The Wall-To-Glass Bar has a bell-shaped clamping device on the wall side, and a solid brass end cap with a swiveling U-shaped receptacle to secure the fixed panel.The Glass-To-Glass Bar has a solid brass end cap with a swiveling U-shaped receptacle on both sides to secure each fixed panel. Nylon-tipped set screws secure the glass and prevent glass-to-metal contact.No holes or cut-outs required. Stock Bars are 39 inches in length. Simply cut to size required.
SAT.BRS.WL/GLS SUP.BAR 3/8-1/2

 
SAT.BR.GLS/GLS SUP.BAR 3/8-1/2

3/4 inch Diameter Tubular Brass Bar

Solid Brass End Caps
ĽNo Hole Drilling Required
Bar Length 39"
 
The Fixed Panel Support Bar will stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling. The Wall-To-Glass Bar has a bell-shaped clamping device on the wall side, and a solid brass end cap with a swiveling U-shaped receptacle to secure the fixed panel. The Glass-To-Glass Bar has a solid brass end cap with a swiveling U-shaped receptacle on both sides to secure each fixed panel. Nylon-tipped set screws secure the glass and prevent glass-to-metal contact. No holes or cut-outs required. Stock Bars are 39 inches (1 meter) in length. Simply cut to size required.
ST.BR.GLS/GLS SUP.BAR 1/4-5/16

 
045 Trianon Hinge

Self-Centering with Reversible 5░ Pivot Pin

Hinge Swings: 90░ in and 90░ out
Solid Brass Construction
 
The Trianon Series of professional hinges is able to accommodate 1/4 to 5/16 inch glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.Trianon Hinges can be used to support glass in swinging door installations. They feature radiused corners and beveled edges in five decorator finishes.Trianon Hinges are constructed of solid brass with a self-centering mechanism for door alignment when within 15░ of the center. They contain a Reversible Pivot Pin for optional; 5░ offset door closure.Five distinct models include two Wall Mount styles, along with three Glass-to-Glass styles.
UC77 - Traditional Std U-Clamp

For 5/16 in. to 3/8 in. Thick Glass

Solid Brass Construction
5/8" to 3/4" hole required
Holds Glass 5/32"-3/16" Off Surface
 
This Fixed Panel U-Clamp mounts directly to the wall, ceiling or floor to secure vertical fixed glass panels. Clearance between the glass and wall is from 5/32 to 3/16 inch (4.0 to 4.8 millimeter). Clear silicone can be used to seal the gap and provide a clean, water-tight appearance.

For 5/16 in. to 1/2 in. Thick Glass

Solid Brass
5/8" to 3/4" hole required
Three Year Warranty
 
This Oversized Fixed Panel U-Clamp performs the same function as our Standard Fixed Panel U-Clamps.They are especially recommended for 1/2 inch thick glass installations where a hole drilling measurement of 1-1/2 inches times the glass thickness is required by the Temperer (from the edge of the glass to the closest edge of the hole).
UC79 - Traditional Large U-Clamp

For 5/16 in. to 1/2 in. Thick Glass

Solid Brass
5/8" to 3/4" hole required
Three Year Warranty
 
This Oversized Fixed Panel U-Clamp performs the same function as our Standard Fixed Panel U-Clamps.They are especially recommended for 1/2 inch thick glass installations where a hole drilling measurement of 1-1/2 inches times the glass thickness is required by the Temperer (from the edge of the glass to the closest edge of the hole).
UC79 - Traditional Large U-Clamp

For 5/16 in. to 1/2 in. Thick Glass

Solid Brass
5/8" to 3/4" hole required
Three Year Warranty
 
This Oversized Fixed Panel U-Clamp performs the same function as our Standard Fixed Panel U-Clamps.They are especially recommended for 1/2 inch thick glass installations where a hole drilling measurement of 1-1/2 inches times the glass thickness is required by the Temperer (from the edge of the glass to the closest edge of the hole).
VIC12 - 12" Sgl-Side Towel Bar Victorian

Fits 1/4 in. to 1/2 in. Thick Glass

Solid Brass
Through the Glass Mounting
Three Year Warranty
 
This Victorian Style Single Sided Towel Bar is designed for glass mounting on fixed panels or doors. The eye-catching design features the same contoured, woodturning visual appeal to match our popular Back-to-Back Victorian Style Pull Handles. Decorative metal washers provide the finishing touch. Victorian Style Back-to-Back Towel Bars are available in three popular sizes and several beautiful finishes.
VIC8X8 - 8" Bak-to-Bak Pull Victorian

Solid Brass Construction

Designed for 1/4" to 1/2" glass
1/2" Hole Required
Three Year Warranty
 
These Victorian Style Handles will bring style, elegance and a unique look to a frameless shower door. The eye catching design features a contoured, "woodturning" visual appeal. The vertical sides of the handle have a thick middle portion for solid gripping and a strong feel, then taper to a thinner, sleeker look culminating in stylish and handsome knuckles. Metal washer provide the finishing touch, along with plastic washers to protect against glass-to-metal contact.
037 Vienna Hinge . . . ( 36 max )

For 3/8" or 1/2" Glass

Self Centering Design
In-swing & Out-swing
Solid Brass Construction
Three Year Warranty
 
The Vienna Series heavy duty professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinges can carry a heavy load and allow doors up to 36" wide Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.
180 Vienna Hinge . . . ( 36 max )

Self-Centering -Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
Three Year Warranty
 
The Vienna Series heavy duty professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinges can carry a heavy load and allow doors up to 36" wide Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.

 

 
044 Vienna Hinge . . . . ( 32 max )

Self-Centering -Swings: 90░ in and 90░ out

Offset Back plate
Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Three Year Warranty
 
The Vienna 044 Series heavy duty professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinge has a offset back plate which hides all the mounting screws on the inside of the shower. Because of the offset mounting plate these hinges have a slightly reduced door width capacity compaired to the 037 full back plate hinge. The Vienna 044 hinge allows door widths up to 34" wide for 3/8" glass, and 32" wide for 1.2" glass. The Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.

 

 
337 Vienna Adj. Hinge ( 36 max )

Adjustable Self-Centering Hinge

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
Three Year Warranty
 
The Vienna Adjustable Series of heavy duty professional hinges are designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinges can carry a heavy load and allow doors up to 36" wide Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Adjustable Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. These hinges have two small allen screws which allow you to reset the door closed position. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.

 

 
380 Vienna Adj. Hinge ( 36 max )

Adjustable Self-Centering Hinge

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
Three Year Warranty
 
The Vienna Adjustable Series of heavy duty professional hinges are designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinges can carry a heavy load and allow doors up to 36" wide Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Adjustable Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. These hinges have two small allen screws which allow you to reset the door closed position. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.
380 Vienna Adj. Hinge ( 36 max )

Adjustable Self-Centering Hinge

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
Three Year Warranty
 
The Vienna Adjustable Series of heavy duty professional hinges are designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinges can carry a heavy load and allow doors up to 36" wide Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Adjustable Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. These hinges have two small allen screws which allow you to reset the door closed position. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.

 

 

 

 

 
GEN074CBA Hinge with Brass Accents

Ideal for Bi-Fold Application

Glass Thickness: 5/16 to 3/8 inch
 
The Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.All six styles of Zurich Hinges feature stainless steel construction and are available in up to seven finishes.The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.
Wall Mount Inswing Hinge

Ideal for Bi-Fold Application

Glass Thickness: 5/16 to 3/8 inch
 
The Zurich Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of six styles, including Wall Mount and Glass-to-Glass types, gives design flexibility.All six styles of Zurich Hinges feature stainless steel construction and are available in a variety of finishes.The brass finish is also available in solid brass construction with a protective coating. In addition, screws and washers are interchangeable for a special design accent. Only two holes per attachment are required, with no cut-out necessary.

 

 
Eyebrow Arch Top

 
Bell Top

 
Clock Face Top

 
House Top

 
S - Curve Corner

 
2 in Radius Corner

 
12 in Radius Corner

 
24 in Radius Corner

 
Scalloped Corners

 
Std. 3/8" U-Channel Kit (98"max length)

Ideal for Fixed Panel installations

Available in Many Finishes
Extruded Aluminum with matching finishes
Kit includes stainless steel screws, anchors, and setting blocks.
Pre-cut to fit your install
 
The ideal method of installing fixed panels. The 3/4 high profile U-Channel conforms to your wall conditions absorbing problems to provide a clean installation. Minor wall problems,(i.e. bow / bulge) are absorbed. The continous U-Channel presents a easy to clean envioronment. All channel pieces are precut with miters. It is possible that streight cut end may need to be trimmed during the installation. Kit includes all stainless steal screws, anchors, and setting blocks needed for the install.
Std. 1/2" U-Channel Kit (98"max length)

Ideal for Fixed Panel installations

Available in Many Finishes
Extruded Aluminum with matching finishes
Kit includes stainless steel screws, anchors, and setting blocks.
Pre-cut to fit your install
 
The ideal method of installing fixed panels. The 3/4 high profile U-Channel conforms to your wall conditions absorbing problems to provide a clean installation. Minor wall problems,(i.e. bow / bulge) are absorbed. The continous U-Channel presents a easy to clean envioronment. All channel pieces are precut with miters. It is possible that streight cut end may need to be trimmed during the installation. Kit includes all stainless steal screws, anchors, and setting blocks needed for the install.
Select Sealant (Optional)

 

 
Quarter Round 6" Shelf

Corner Shelf

Three sizes
3/8" Glass /w Polished Edge
 
Our corner shelf come in three sizes 6", 8" and 10". These quarter round selves are the perfect solution for holding that shampoo bottle or foot support. The shelves come with U channnel brackets, stainless screws and anchors. The U channel is cut 1/4" shorter than the glass and the cut end shows. The exposed curved edge is pencil polished, and the sides are flat polished. The glass is tempered safety glass so it is good for in the shower area. Use clear silicone to hold glass in channel
Maintenance Products ( Optional )

 
TPC Surface Protector will actually seal the pores of glass, porcelain, ceramic, plastics, polished metals, fiberglass and marble to make the surface water, soil and stain resistant. The clear coating guards against the adhesion and build-up of dirt, grime, mold, mildew, rust and mineral deposits. Environmentally friendly and non-toxic, CRL TPC Surface Protector permits the practice of preventive maintenance, reducing costly cleaning, repairs and replacement. Simply spray on and polish off. One fluid ounce (29 milliliter) of TPC Surface Protector protects approximately 15 square feet (4,572 square millimeters) of glass.

 

 

Features the Patented Multi-Mag 2X and 7X Mirror System for Simultaneous Viewing

Extends 15 Inches (381 millimeter) from the Mounting Surface
 
w
001 Rondo Top.Bot Pivot Hinge

Designed for 5/16 in. to 3/8 in Glass

Solid Brass Construction
Self Centering Design
Full Rotation Swing
 
The Rondo Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Rondo Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Rondo Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
002 Rondo Gls-to-Gls Pivot Hinge

Designed for 5/16 in. to 3/8 in Glass

Solid Brass Construction
Self Centering Design
Full Rotation Swing
 
The Rondo Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Rondo Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Rondo Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
003 Rondo Wall Mount Pivot Hinge

Designed for 5/16 in. to 3/8 in Glass

Solid Brass Construction
Self Centering Design
Full Rotation Swing
 
The Rondo Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Rondo Hinges are self-centering, with four springs for maximum retention strength. Optional 5║ Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Rondo Series is adaptable to our Deluxe Header System for shower enclosures not extending to full ceiling height.
Quarter Round 8" Shelf w/ U Channel

Corner Shelf

Three sizes 6" ,8" & 10"
3/8" Glass /w Polished Edge
 
Our corner shelf come in three sizes 6", 8" and 10". These quarter round selves are the perfect solution for holding that shampoo bottle or foot support. The shelves come with U channnel brackets, stainless screws and anchors. The U channel is cut 1/4" shorter than the glass and the cut end shows. The exposed curved edge is pencil polished, and the sides are flat polished. The glass is tempered safety glass so it is good for in the shower area. Use clear silicone to hold glass in channel
Quarter Round 10" Shelf w/ U Channel

Corner Shelf

Three sizes 6" ,8" & 10"
3/8" Glass /w Polished Edge
 
Our corner shelf come in three sizes 6", 8" and 10". These quarter round selves are the perfect solution for holding that shampoo bottle or foot support. The shelves come with U channnel brackets, stainless screws and anchors. The U channel is cut 1/4" shorter than the glass and the cut end shows. The exposed curved edge is pencil polished, and the sides are flat polished. The glass is tempered safety glass so it is good for in the shower area. Use clear silicone to hold glass in channel

 
Dual Arm Wall Mount Magnifying Mirror

5X Magnififying Mirror

Dual Arms Exten to 14"
Surround Light
Crystal Clear Optics
9 in. Mirror
 
The Surround Light? Dual Arm Wall Mount Mirrors amplifies light both across the mirror surface, and outward to illuminate the face at any angle of viewing.We?ve selected four high quality finishes for the mounting plate and swing arms to match the most popular bath hardware accessories. As with all Surround Light? Mirrors, they will give your customers fog-free optics. Instant on/off switch has cord or direct wire connection capability. One per package. Cat. No. ZP129 is the Replacement Bulb for this mirror.
Dual Arm Wall Mount Magnifying Mirror

7X Magnififying Mirror

Dual Arms Exten to 14"
Surround Light
Crystal Clear Optics
9 in. Mirror
 
The Surround Light? Dual Arm Wall Mount Mirrors amplifies light both across the mirror surface, and outward to illuminate the face at any angle of viewing.We?ve selected four high quality finishes for the mounting plate and swing arms to match the most popular bath hardware accessories. As with all Surround Light? Mirrors, they will give your customers fog-free optics. Instant on/off switch has cord or direct wire connection capability. One per package. Cat. No. ZP129 is the Replacement Bulb for this mirror.

 
Adjustable Pedestal Magnifying Mirror

2X & 7X Magnification in one view

Adjusts to 28" above surface
Magnification of 2X & 7X
 
Our Multi-Mag 9 Inch (228.6 millimeter) Adjustable Pedestal Vanity Mirrors allow you to switch views easily and precisely during use. The quick adjusting pedestal stand is available in four beautiful finishes to match the most popular bath hardware accessories.
Pedestal Magnifying Mirror /w Surround Light

Surround Light

Powerful 2X and 7X mirrors
Adjustable Height Pedestal
 
You'll get the best features available in a vanity mirror when you order the our Multi-Mag 9 Inch (228.6 millimeter) Diameter Adjustable Pedestal Vanity Mirrors With Surround Light. The 7X magnification mirror is 6 inches (152.4 millimeter) in diameter. The 2X mirror is a big 9-1/4" (234.95 millimeter), and has the Surround Light system for illumination at its best.
98" Shower Door Header System Kit

Manufactured For Your Shower Door Kit

Includes Corner Brackets & Wall Connectors
 
The Deluxe Header Kit will provide additional support and a level of safety while securing glass panels not reaching the ceiling. Deluxe Header Kits are pre cut to simplify the installation process. Some minor trimming in the field may be required. Sold in 66, 98 and 144 inch (1676, 2489 and 3657 millimeter) lengths, the double profile extrusion has a narrow 1-1/4 inch (31.8 millimeter) face to minimize the visible sight line. A choice of facing edges (round or flat with mitered edges) is possible by simply reversing the extrusion. 90║, 135║ or Adjustable corners. The kit includes all corner brackets, wall brackets and hinge Adapter Block for use on pivot hinge installations. Header is constructed of aluminum alloy 6463. This Header Kit is adaptable to Senior Prima or Prima Hinges.
Aluminum U-Channel for 1/4"Glass

Stock Length 72"

Extremely Versatile
 
This aluminum U-Channel for 1/4" glass is one of our most versatile extrusions. Use it to secure fixed glass panels in showers, or glass partition panel

 

 

 

 

 
20" 135 Degree Grab Bar w/ Basket

1-1/4" Diameter Stainless Steel or Brass Tubing

Wire Basket for Soap or Sampoo
Attractive Cover Flanges Conceal Mounting Hardware
Add an Element of Safety to Wet Environments
Several Stock Finishes, With Custom Finishes Available
 
This heavy-duty Grab Bar With Wire Basket will add to the decor of any shower enclosure. At the same time, they provide an important element of bathroom safety. These surface mounted Bars are 1-1/4 inches in diameter, and feature a cover flange to conceal the fasteners. Stylish 20 inch 135║ Grab Bar With Wire Basket brings a new and different look to Grab Bars. Constructed of stainless steel or brass material in several finishes, Grab Bars come with matching wire basket for soaps, shampoos, and washcloths and are individually wrapped with fasteners included.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Movable Transom (Gls-Wall & Gls-Wall)

Fits 5/16" to 1/2" Thick Glass

Solid Brass Construction
Use for Style 3 or 6 Steam Showers
2 - Notches Required
 
Movable Transom Clamp kit with two 180 glass to glass standard clamps. These clamps are used to pivot transom panels above the shower door. These clamps are designed to work with 5/16" to 1/2" thick glass. Includes mounting screws and gaskets.

 

 
Std. Movable Transom Kit (180░ Gls-Gls & Gls-Wall)

Fits 5/16" to 1/2" Thick Glass

Use on Style 2 & 5 Steam Showers
3 - Notches / Holes Required
Solid Brass Construction
 
Movable Transom Clamp kit for Style 2 & 5 steam showers. Contains a 180░ glass to glass standard clamp and one glass to wall standard clamp. These clamps are used to pivot transom panels above the shower door. These clamps are designed to work with 5/16" to 1/2" thick glass. Includes mounting screws and gaskets.

 

 
Std. Movable Transom (180░ Gls-Gls & 180░ Gls-Gls)

Fits 5/16" to 1/2" Thick Glass

 

 

 
135░ Movable Transom (Gls-Gls & Gls-Gls)

Fits 5/16" to 1/2" Thick Glass

2 - Holes & 2 - Notches Required
 

 

 

 

 

 
BCU4 - Beveled Heavy Duty Clamp

For 3/8" to 1/2" Thick Glass

Solid Brass Construction
3/16 in. Glass to Tile w/ hole
0 to 3/16 in. Glass to Tile w/notch
Matches Pinnacle & Cologne hinge styles
 
This Beveled Wall Mount Clamp mounts directly to the wall, ceiling or floor to secure vertical fixed glass panels. The style of this clamp matches the style of the Pinnacle and Cologne Series of hinges. Clearance between the glass and wall is 3/16 inch with the standard mounting hole or 0 to 3/16 when a notch is used. Crystal clear silicone can be used to seal the gap and provide a clean, water-tight appearance.

For 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
BGC188 - Bev. Gls-to-Gls Transom Clamp

For 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square Beveled Glass-to Glass Transom Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass fixed transom or inline panel installations in
BGC188 - Bev. Gls-to-Gls Transom Clamp

For 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square Beveled 90 degree Glass-to Glass Transom Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass fixed transom or inline panel. This clamp will work for butt or mitered joints.
BGC90 - Bev. 90░ Glass-to-Glass Clamp

For 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square Beveled 90 degree Glass-to Glass Transom Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass fixed transom or inline panel. This clamp will work for butt or mitered joints.

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the glass assembly
Three Year Warranty
 
Our Tubular Single Sided Towel Bars are constructed of thick brass tubing. The 1/8 inch low profile end caps make this bar an ideal choice for most by-pass sliding doors. Plastic washers are provided to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
BMNW8X24 - 8" Pull - 24" Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the Glass Mounting
Three Year Warranty
 
The BM series Pull Handle / Towel Bar Combination is constructed of heavy brass tubing, Plastic washers to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. This bar requires three 1/2 inch holes. The bar requires 2-1/2 inches of clearance. The ends use a low profile button screw.
BMNW8X24 - 8" Pull - 24" Towel Bar

3/4" Diameter Heavy Brass Tubing

No Washers
1/2" holes required
Through the Glass Mounting
Three Year Warranty
 
The BM series Pull Handle / Towel Bar Combination is constructed of heavy brass tubing, Plastic washers to protectect against glass-to-metal contact. Available in five sizes and ten popular finishes. Fits 1/4 to 1/2 inch thick glass. This bar requires three 1/2 inch holes. The bar requires 2-1/2 inches of clearance. The ends use a low profile button screw.
037 Cologne Hinge . . . ( 36 max )

Self-Centering -Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
Three Year Warranty
 
The Cologne Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Cologne Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Cologne Hinge to be used with it's own "mouse-ears" cut-out, or in some cases fit competitive "mouse-ear" cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Cologne Hinge to fit it's own rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.
045 Cologne Hinge . . . ( 36 max )

Heavy Duty design for 3/8" or 1/2" glass

Solid Brass Construction
Self-Centering when within 15░of closed Position
 
The Cologne Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Cologne Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Cologne Hinge to be used with it's own "mouse-ears" cut-out, or in some cases fit competitive "mouse-ear" cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Cologne Hinge to fit it's own rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.
180 Cologne Hinge . . . ( 36 max )

Solid Brass Construction
 
The Cologne Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Cologne Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Cologne Hinge to be used with it's own "mouse-ears" cut-out, or in some cases fit competitive "mouse-ear" cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Cologne Hinge to fit it's own rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.

Designed for 5/16" or 3/8" glass

Solid Brass Construction
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Classique Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Classique Shower Door Hinge is a design apart from traditional hinges. Beautiful round design and beveled edges are the result of an artist's unique concept of the perfect hinge for decors with strong curved and contoured influences. There are five distinct models, including a Flush Back Plate Wall Mount Hinge for clean exterior sight lines. The Classique's beveled edges make an excellent presentation of sleek desgn, while the solid brass construction ensures superior quality and long life.

Designed for 5/16" or 3/8" glass

135 degree Glass-to Glass
Self-Centering when within 15░of closed Position
Swing 90░ in and 90░ out
Three Year Warranty
 
The Classique Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Classique Shower Door Hinge is a design apart from traditional hinges. Beautiful round design and beveled edges are the result of an artist's unique concept of the perfect hinge for decors with strong curved and contoured influences. There are five distinct models, including a Flush Back Plate Wall Mount Hinge for clean exterior sight lines. The Classique's beveled edges make an excellent presentation of sleek desgn, while the solid brass construction ensures superior quality and long life.

Designed for 5/16" or 3/8" glass

180 degree Glass-to Glass
Self-Centering when within 15░of closed Position
Safety Lock Cutout
Three Year Warranty
 
The Classique Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Classique Shower Door Hinge is a design apart from traditional hinges. Beautiful round design and beveled edges are the result of an artist's unique concept of the perfect hinge for decors with strong curved and contoured influences. There are five distinct models, including a Flush Back Plate Wall Mount Hinge for clean exterior sight lines. The Classique's beveled edges make an excellent presentation of sleek desgn, while the solid brass construction ensures superior quality and long life.
CSH8X8 - 8" Bk-to-Bk Crescent Pull

3/4" (19 mm) Diameter Solid Aluminum

Designed for 3/8" or 1/2" glass
Through the Glass Mounting
Three Year Warranty
 
These Crescent Style Back-to-Back Pull Handles are constructed of solid aluminum. These handles do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one pull for each side of the door (back-to-back).
CSH6X6 - 6" Bk-to-Bk Crescent Pull

3/4" (19 mm) Diameter Solid Aluminum

Designed for 3/8" or 1/2" glass
Through the Glass Mounting
Three Year Warranty
Three Year Warranty
 
These Crescent Style Back-to-Back Pull Handles are constructed of solid aluminum. These handles do not include decorative metal washers. Standard plastic washers are included to protect against glass-to-metal contact. Consists of one pull for each side of the door (back-to-back).
037 Estate Hinge . . . . ( 26 max )

Designed for 3/8 or 1/2 Glass

Self-Centering - Swings: 90░ in and 90░ out
Solid Brass Construction w/ Stainless Steel Springs & Pin
Standard Duty Hinge
Three Year Warrenty
 
The Estate Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Estate Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost "floating" appearance. The Estates heavy-duty stainless steel springs allow the door to swing 90░ in and 90░ out. A friction cam allows the door to be firmly maintained in any position, except when within 15░ of the closed position, where it is tapered to assist in centering the door.
Square Shelf Clamp

Fits 5/16" to 3/8" Glass

No Hole in Glass
Available in 9 Finishes
Solid Brass Construction
Three Year Warranty
 
Solid Brass Interior Shelf Clamps can be used to secure a shelf for shampoo bottles or other lightweight shower articles. Clamps should be secured to wall with screws (not included) in studs, or with Molly-type anchors. Nylon tip brass tension screws secure the glass. Maximum five inch glass protrusion from wall is recommended. Clamps will hold 5/16 to 3/8 inch glass, with no glass holes
Wide Shelf Clamp

Fits 5/16" to 3/8" Glass

No Hole in Glass
Available in 9 Finishes
Solid Brass Construction
Three Year Warranty
 
Solid Brass Interior Shelf Clamps can be used to secure a shelf for shampoo bottles or other lightweight shower articles. Clamps should be secured to wall with screws (not included) in studs, or with Molly-type anchors. Nylon tip brass tension screws secure the glass. Maximum five inch glass protrusion from wall is recommended. Clamps will hold 5/16 to 3/8 inch glass, with no glass holes
GE90S - Geneva Wall Clamp

For 3/8" to 1/2" Thick Glass

Solid Brass Construction
Matches the Geneva Hinge Style
Three Year Warranty
 
The Geneva Wall Bracket is able to accommodate 3/8 to 1/2 inch (8 to 12 millimeter) glass. The Geneva Wall Brackets have the identical configuration as the Geneva Hinges which will provide continuity of design. They feature square corners and edges in six decorator finishes and are constructed of solid brass.

 
345 Pinnacle Ajustable Gls to Gls Hinge

Self-Centering - Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Adjustment up to 90░
 
The Pinnacle Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Pinnacle Adjustable Series has taken our popular Pinnacle Series to a new level. Adjustment to accommodate the angle desired (up to 90░) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0░. The door can swing 90░ inward and also 90░ outward (adjusting angle from factory set position will reduce 90░ swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5░ inside the shower area, thus having the door close snugly against the jamb.
180 Regal Gls to Gls Hinge

Designed for 5/16 in. to 3/8 in Glass

Solid Brass Construction
Self Centering Design
No Cut-out - Two holes per Panel
 
044 Roman Hinge . . .. ( 28 max )

Designed for 3/8 or 1/2 Glass

Self-Centering - Swings: 90░ in and 90░ out
Solid Brass Construction w/ Stainless Steel Springs & Pin
Standard Duty Hinge
Three Year Warrenty
 
The Roman Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of five styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. The Offset Back Plate allows for a clean sight line from the shower exterior. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Roman Hinges are self-centering, and contain a Reversible 5║ Pivot Pin.
SBP81 - 8" Bak-to-Bak Pull Solid 1"

Solid Brass Construction

One Inch Diameter
Design for 3/8" to 1/2" Glass
Through the glass mounting (5/8" hole)
8" Center-to-Center Hole Spacing
 
This One Inch Diameter Back-to-Back Solid Brass Pull Handle becomes an intergral part of the door with its substantial appearance. These Pulls come without metal washers. Glass fabrication requires 5/8 inch (16 millimeter) diameter holes in the glass, drilled eight inches (203 millimeters) center-to-center. Fits 3/8 to 1/2 inch (10 to 12 millimeter) thick glass.
SGC135 - 135░ Square Gls-to-Gls Clamp

Fits 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square 135░ Glass-to-Glass Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass panels which meet at a 135░ angle.
SGC135 - 135░ Square Gls-to-Gls Clamp

Fits 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square 135░ Glass-to-Glass Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass panels which meet at a 135░ angle.
SGC186 - Square Wall Mount Transom Clamp

Fits 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square 180░ Glass-to-Glass Clamp is designed to clamp 3/8 to 1/2 inch glass fixed transom or inline panel installations in frameless shower enclosures.
SGC188 - Square Gls-to-Gls Transom Clamp

Fits 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square 180░ Glass-to-Glass Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass fixed transom or inline panel installations in frameless
SSDP6 - 6" Bk-to-Bk Pull Sculptured Solid

Fits 3/8 to 1/2 Inch Thick Glass

Through the glass mounting
Solid Brass Construction
Three Year Waranty
Three Year Warranty
 
This Sculptured Shower Door Pull Handles have a unique free-form design that sets it apart from other pull handles. The curved shape, combined with a distinguishing flat tapered appearance, will guarantee that this Pull Handle will be noticed.
SUP

 
VIC12 - 12" Bk-to-Bk Towel Bar Victorian

Fits 1/4 in. to 1/2 in. Thick Glass

Solid Brass
Through the Glass Mounting
Three Year Warranty
 
This Victorian Double Single Sided Towel Bar is designed for glass mounting on fixed panels or doors. The eye-catching design features the same contoured, woodturning visual appeal to match our popular Back-to-Back Victorian Style Pull Handles. Decorative metal washers provide the finishing touch. Victorian Style Back-to-Back Towel Bars are available in three popular sizes and several beautiful finishes.
VIC12 - 12" Bk-to-Bk Towel Bar Victorian

Fits 1/4 in. to 1/2 in. Thick Glass

Solid Brass
Through the Glass Mounting
Three Year Warranty
 
This Victorian Double Single Sided Towel Bar is designed for glass mounting on fixed panels or doors. The eye-catching design features the same contoured, woodturning visual appeal to match our popular Back-to-Back Victorian Style Pull Handles. Decorative metal washers provide the finishing touch. Victorian Style Back-to-Back Towel Bars are available in three popular sizes and several beautiful finishes.
VIC24X24 - 24" Bk-to-Bk Towel Bar Victorian

Fits 1/4 in. to 1/2 in. Thick Glass

Solid Brass
Through the Glass Mounting
Three Year Warranty
 
This Victorian Double Single Sided Towel Bar is designed for glass mounting on fixed panels or doors. The eye-catching design features the same contoured, woodturning visual appeal to match our popular Back-to-Back Victorian Style Pull Handles. Decorative metal washers provide the finishing touch. Victorian Style Back-to-Back Towel Bars are available in three popular sizes and several beautiful finishes.

Fits 1/4 in. to 1/2 in. Thick Glass

Solid Brass
Through the Glass Mounting
Three Year Warranty
 
This Victorian Style Pull Handle/Towel Bar Combination Set is designed for glass mounting on shower doors. Each set consists of one towel bar and one pull handle, along with decorative metal washers. Victorian Style Pull Handle/Towel Bar Combination Set are available in two popular sizes and several beautiful finishes.

 

 
045 Vienna Hinge . . . ( 36 max )

Glass Thickness: 3/8 to 1/2 inch

Self-Centering -Swings: 90░ in and 90░ out
Solid Brass Construction
Safety Lock Cutout
Three Year Warranty
 
The Vienna Series heavy duty professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinges can carry a heavy load and allow doors up to 36" wide Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.
074 Vienna Hinge . . . . ( W <= 34 )

 
074 Vienna Hinge . . . . ( W <= 34 )

 
074 Vienna Hinge . . . . ( W <= 34 )

 
074 Vienna Hinge . . . . ( 34 max )

Self-Centering -Swings: 90░ in and 90░ out

Glass Thickness: 3/8 to 1/2 inch
Solid Brass Construction
Safety Lock Cutout
Three Year Warranty
 
The Vienna Series heavy duty professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. This hinges can carry a heavy load and allow doors up to 36" wide Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with safety lock "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit a rectangular shape, square cornered cut-out.

 

 
BGC90 - Bev. 90░ Glass-to-Glass Clamp

For 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square Beveled 90 degree Glass-to Glass Transom Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass fixed transom or inline panel. This clamp will work for butt or mitered joints.
BGC135 - 135░ Bev. Gls-to-Gls Clamp

For 3/8 in. to 1/2 in. Glass

Solid Brass Construction
Glass Holes Required
Three Year Warranty
 
This Square Beveled 135 degree Glass-to Glass Transom Clamp is designed to clamp 3/8 to 1/2 inch (10 to 12 millimeter) glass fixed transom or inline panel.

For 1/4" to 1/2" Glass

Decorative Washers
3/4" Diameter Heavy Brass Tubing
Three Year Warranty
 
Our Tubular Single Sided Towel Bars with metal washers are constructed of thick brass tubing. The 3/16 inch low profile end caps make this bar an deal choice for most by-pass sliding doors. Decorative metal backup washers are included, as well as plastic washers to protectect against glass-to-metal contact. Available in nine sizes and eight popular finishes. Fits 1/4 to 1/2 inch thick glass. Requires two 1/2 inch diameter holes.
VIC18X18 - 18" Bk-to-Bk Towel Bar Victorian

Fits 1/4 in. to 1/2 in. Thick Glass

Solid Brass
Through the Glass Mounting
Three Year Warranty
 
This Victorian Style Single Sided Towel Bar is designed for glass mounting on fixed panels or doors. The eye-catching design features the same contoured, woodturning visual appeal to match our popular Back-to-Back Victorian Style Pull Handles. Decorative metal washers provide the finishing touch. Victorian Style Back-to-Back Towel Bars are available in three popular sizes and several beautiful finishes.
VIC24X24 - 24" Bk-to-Bk Towel Bar Victorian

Fits 1/4 in. to 1/2 in. Thick Glass

Solid Brass
Through the Glass Mounting
Three Year Warranty
 
This Victorian Double Single Sided Towel Bar is designed for glass mounting on fixed panels or doors. The eye-catching design features the same contoured, woodturning visual appeal to match our popular Back-to-Back Victorian Style Pull Handles. Decorative metal washers provide the finishing touch. Victorian Style Back-to-Back Towel Bars are available in three popular sizes and several beautiful finishes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Colonial Style 18" Towel Bar

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Single-Sided Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely consider for a lasting impression of your frameless shower enclosure. The Colonial Style Single-Sided Towel Bar will work with 1/4 to 1/2 inch thick glass.
Colonial Style 18" Towel Bar

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Single-Sided Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely consider for a lasting impression of your frameless shower enclosure. The Colonial Style Single-Sided Towel Bar will work with 1/4 to 1/2 inch thick glass.

 

 
Colonial Style 24" Towel Bar

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Single-Sided Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely consider for a lasting impression of your frameless shower enclosure. The Colonial Style Single-Sided Towel Bar will work with 1/4 to 1/2 inch thick glass.
Colonial Style 24" Towel Bar

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Single-Sided Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely consider for a lasting impression of your frameless shower enclosure. The Colonial Style Single-Sided Towel Bar will work with 1/4 to 1/2 inch thick glass.

 

 

 

 

 

 
Colonial 18" Bak-to-BakTowel Bar

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Back-to-Back Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely want to consider for your modern frameless shower enclosure. Nine popular stock finishes are available, with custom finishes upon request. The Colonial Style Back-to-Back Towel Bar will work with 1/4 to 1/2 inch thick glass.
Colonial 18" Bak-to-BakTowel Bar

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Back-to-Back Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely want to consider for your modern frameless shower enclosure. Nine popular stock finishes are available, with custom finishes upon request. The Colonial Style Back-to-Back Towel Bar will work with 1/4 to 1/2 inch thick glass.

 

 

 

 

 

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Back-to-Back Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely want to consider for your modern frameless shower enclosure. Nine popular stock finishes are available, with custom finishes upon request. The Colonial Style Back-to-Back Towel Bar will work with 1/4 to 1/2 inch thick glass.
Colonial 24" Bak-to-BakTowel Bar

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Back-to-Back Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely want to consider for your modern frameless shower enclosure. Nine popular stock finishes are available, with custom finishes upon request. The Colonial Style Back-to-Back Towel Bar will work with 1/4 to 1/2 inch thick glass.
Colonial 24" Bak-to-BakTowel Bar

Solid brass fittings with Tubular bass bar

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
 
The Colonial Style Back-to-Back Towel Bar has a unique appearance and visual appeal. The multiple contours of the Towel Bar, along with the numerous integrated brass hardware fittings, make this Towel Bar one you will surely want to consider for your modern frameless shower enclosure. Nine popular stock finishes are available, with custom finishes upon request. The Colonial Style Back-to-Back Towel Bar will work with 1/4 to 1/2 inch thick glass.

 

 

 

 

 

 
Crecent 18" Bak-to-Bak Towel Bar

3/4" Solid Aluminum Construction

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
Sleek Profile - no metal washers
 
This solid aluminum Back-to-Back Crescent Style frameless shower door towel bar is part of the Crescent Style hardware series, that includes pull handles, single and double sided towel bars. The family is distinguish by its arched look that lends style and elegance to any shower enclosure. The bar is plated to match our most popular finishes. This is a ? Back-to-Back? configuration with through the glass mounting. Hole diameter required is 1/2 inch (12 millimeter). Center-to-Center Gap Spacing is 18 in. for the 18 inch Towel Bar, and 24 inches for the 24 inch Towel Bar.
Crecent 18" Bak-to-Bak Towel Bar

3/4" Solid Aluminum Construction

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
Sleek Profile - no metal washers
 
This solid aluminum Back-to-Back Crescent Style frameless shower door towel bar is part of the Crescent Style hardware series, that includes pull handles, single and double sided towel bars. The family is characterized by its arched look that lends style and elegance to any shower enclosure. The bar is plated to match our most popular finishes. This is a ? Back-to-Back? configuration with through the glass mounting. Hole diameter required is 1/2 inch (12 millimeter). Center-to-Center Hole Spacing is 18 inches for the 18 inch Towel Bar, and 24 in. for the 24 inch Towel Bar.

 

 

 

 

 

 
CSH - Crecent 24" Bak-to-Bak Towel Bar

3/4" Solid Aluminum Construction

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
Sleek Profile - no metal washers
 
This solid aluminum Back-to-Back Crescent Style frameless shower door towel bar is part of the Crescent Style hardware series, that contains pull handles, single and double sided towel bars. The family is distinguish by its arched look which lends style and elegance to any shower enclosure. The bar is plated to match our most popular finishes. This is a ? Back-to-Back? configuration with through the glass mounting. Hole diameter required is 1/2 inch (12 millimeter). Center-to-Center Hole Spacing is 18 in. for the 18 inch Towel Bar, and 24 in. for the 24 inch Towel Bar.
<
CSH - Crecent 24" Bak-to-Bak Towel Bar

3/4" Solid Aluminum Construction

Fits 1/4" to 1/2" Glass
Through the Glass Mounting
Sleek Profile - no metal washers
 
This solid aluminum Back-to-Back Crescent Style frameless shower door towel bar is part of the Crescent Style hardware series, that includes pull handles, single and double sided towel bars. The family is distinguish by its arched appearance that lends style and elegance to any shower enclosure. The bar is plated to match our most popular finishes. This is a ? Back-to-Back? configuration with through the glass mounting. Hole diameter required is 1/2 inch (12 millimeter). Center-to-Center Hole Spacing is 18 inches for the 18 inch Towel Bar, and 24 inches for the 24 inch Towel Bar.